170*170*20橡胶减震垫 工业设备橡胶减震垫
Rubber damping pad for industrial equipment of 170*170*20 rubber cushion
上海淞江减震器集团有限公司官方网站为您介绍:170*170*20橡胶减震垫信息,工业设备橡胶减震垫是一款最为普通的橡胶减震垫产品,没有什么重量之分,平放在设备底部即可,是传统的减震产品,效果一般。
Shanghai Songjiang absorber group limited official website for your introduction: 170*170*20 rubber shock pad, industrial equipment, rubber shock pad is a most common rubber shock pad products, not what weight, can be flat at the bottom of the device, is the product of traditional damping, the general effect.
The SD rubber shock absorber is manufactured by vulcanization using oil resistant rubber and stretch materials: whost surface can reduce the vertical rigidity.The basic dinension of the shock absorber cushion is 84x84x20(mm).The load range covers from 0.2~6KN.It needs no isolation walls.To improve shock absorption effect, multi-layer. isolation cushion should be used.Sepa-rate, layers can be separated by metal sheet(3mm). The total rigidity of n layers of cushion are 1/n that of a single layer.When the isolated object is relatively lighter, you can cut it into 2 pieces.The rigidity is 1/2 that of the original one. The separated isolating cushion can also be used in series.
SD type rubber shock pad is made of high quality rubber as the material, there is a circular depression, corrugated hollow shear. In general, shear force, has low natural frequency, simple structure, easy to use. In order to improve the damping effect of the damping pad for two layer, three layer, four layer series. Suitable for water pump, fan, compressor, chiller, diesel and other mechanical equipment of negative damping.
淞江集团生产的SD型工业设备橡胶减震垫产品是由优质的天然橡胶NR生产,弹性好,为工业厂房减震做出一定的贡献。
The SD rubber cushion product produced by Songjiang group is produced by high quality natural rubber NR and has good elasticity and makes a certain contribution to the shock absorption of industrial plant.
SD型工业设备橡胶减震垫的特点是既有高弹性,又有高黏性。橡胶的弹性是由其卷曲分子构象的变化产生的,橡胶分子间相互作用会妨碍分子链的运动,从而表现出黏性阻尼的.点,以致应力与应变往往处于不平衡状态。
The characteristics of rubber cushions are both high elasticity and high viscosity. The elasticity of rubber is caused by the change of its conformational conformation. The interaction between rubber molecules will impede the movement of molecular chains, thus exhibiting the characteristics of viscous damping, so that stress and strain are often in an unbalanced state.
了解该产品详细参数请查看:【样册P85】SD型 橡胶减振垫
原创文章如转载,请注明本文链接: http://www.songjiangjituan.com/1431.html 浏览:5,700